Brewboard->homebrew classifieds

Weld-B-Gone Thermosight $25

Thu, 15 Mar 2012 21:03:53 +0000

Brand new - unopened. I'll take care of the shipping. For US buyers, at least.

I bought it a while back and never installed it. Just drill a hole in your kettle and add this weld-less fitting. Now you have a thermometer and glass sight on your kettle!

FS: Johnson Controls A419

Sun, 29 Jan 2012 22:12:41 +0000

I have a Johnson Controls A419 controller, like new, that I put together some years back. I had planned on lagering, but never actually got a chance. I've attached it to a box, it's prewired so all you have to do is plug it in, plug your fridge into it and stick the probe in your fridge. $60 shipped. Please email me at ga1990@aol.com if interested, thanks!

Shirron Plate Chiller

Thu, 26 Jan 2012 23:09:07 +0000

I would like to sell my plate chiller - sells for $99 new and I would take $50 or best offer. I am in Michigan and will ship for free assuming you do not want it overnight or out of the country I have used numerous times with great success but now would like to switch to another method. Email me at baci_llus at yahoo dot com

Vulcan Cardinal Commercial Fridge - Chicago - $300 OBO

Sun, 11 Dec 2011 19:34:23 +0000

Remodeling forces me to sell my beer fridge. I can hold 4-5 corny's on the bottom and still have tons of room up top. Great for lagering. Looking for a local buyer. Need to move it ASAP. Looking for $300 but all reasonable offers considered.

The details can be seen here:

http://chicago.craigslist.org/chc/app/2742732746.html

Cheers,
Chibrew

The motherload!

Tue, 06 Dec 2011 03:01:19 +0000

The following Items for sale as a lot for $850.00
Everything thing a person needs (and more) to make beer or wine from extracts (beer) or fruit or kits (wine)
All in great condition, well taken care of, gently used. Located in Rock Hill, SC I am willing to meet you in Charlotte one afternoon after 5:00pm
Call (803) 579-0283 or email gearhead03@yahoo.com
I can take more pictures if anyone would like. Most everything was purchased at Jess' shop.

Double Lever Capper 1.00
Super Standard Bench Model Capper 1.00
Big Funnel 1.00
Auto Siphon 1.00
Carboy Brush 1.00
Large Spoon 1.00
Racking cane 1.00
Air locks 5.00
6 gallon carboys 2.00
5 gallon carboys 2.00
1 gallon jugs 4.00
Double Blast Bottle washer 1.00
Hydrometer 2.00
Single Keg Package 1.00
Individual Kegs 2.00
Brew Pot 1.00
Gilda Corker 1.00
Portugese Floor Model Corker 1.00
Fruit Press 1.00
plastic buckets 2.00
large (wine) bucket 1.00
Tubing Brush 1.00
Homemade wooden (12) drying racks 2.00
Small Wine Bottles 88.00
Large Wine Bottles 30.00
Beer Bottles 200.00
The bottle numbers are estimates and on the low side.
I also have assorted caps, cleaners, corks, priming sugars, metal strainers etc. I will include. Actually I think I have a couple cans of malt......

The Fruit Press

Pin Lock Style Kegs $30 - Raleigh, NC

Sat, 25 Jun 2011 18:47:38 +0000

I have 6 pin lock kegs for $30 each. If you take all 6 I'll let them go for $150. Prices are firm.

Starter kegerator setup

Tue, 14 Jun 2011 21:47:34 +0000

10 cu ft Frigidaire chest freezer - UNMODIFIED
Johnson Controls Unit

$125 and you pick up.

Freezer is big enough to hold 4 corny kegs, a CO2 bottle, and several bottles of brew/wine/etc. Units are 3 years old and I'm getting rid of them as I have upgraded to an upright fridge/freezer unit.

Hit me up on my personal email if interested: lytnin@gmail.com

Many Pipe Thread Parts

Wed, 08 Jun 2011 17:02:13 +0000

Hi,
I've been moving my brewery over to tri clover fittings.
So I have a ton of pipe thread parts which I no longer need.

Some of the stuff (all 1/2" SS):
20 ball valves
30 quick disconnects (both male and female).
20 FPT to barb
10 MPT to barb
8 "T"s
8 90 deg FPT elbows
6 90 deg MPT to FPT elbows
8 couplers (FPT)
6 nipples (MPT) 1.5" long
6 nipples (MPT) 1" long
6 nipples (MPT) 2" long with a hex nut in middle
8 MPT plugs

I also have 6 March 809 pump bodies and 4-5 poly-sulphone heads.

Finally, I have a class 100 32" wide laminar flow hood with light.

I have not set up a pay pal account yet, but would do so if anyone has any interest in any of these parts.
I figure half the new price for all parts seems reasonable (plus shipping).

Just reply if anything catches your fancy.

Thanks.

Rhizomes For Sale

Wed, 01 Jun 2011 14:35:21 +0000

Hi everyone,

I recently purchased 10 hop rhizomes and coir yarn with intentions of growing my own hops this year. After a lot of planning and plotting a spot in my backyard I found out from my HOA that I cannot build a structure to support the hops like I had planned. Instead of fighting it, I decided to sell the rhizomes I just purchased along with the twine. I am not looking to make money off these, only recoup the costs and break even (minus shipping costs). I purchased 5 variations and they are all in excellent condition. Since receiving the rhizomes, I have kept them in the fridge in sealed bag and "watered" them continuously with a wet paper towel.

Below is a list of what I have and what I paid. Please let me know if you are interested and we can discuss the details of payment and shipping.

Purchased from Freshops.com, shipped April 11th.
Cascade - 2 rhizomes ($10)
Centennial - 2 rhizomes ($10)
Willamette - 2 rhizomes ($10)

Purchased from Seven Bridges Cooperative, shipped April 8th.
Northern Brewer - 2 rhizomes ($10)
Zeus - 2 rhizomes ($9)

Total $49, plus shipping. My zip code is 28078 if you're interested in estimating shipping.

Thanks!
Denny

Tri Clover Stainless Steel fitting

Wed, 18 May 2011 19:56:34 +0000

They are priced at 28.50 for a set plus shipping. But I do believe they are product that will last for many years to come. They are made out of stainless steel and are Tig welded. A set includes two half�s that can be mixed or match with fittings, EPDM gasket and clamp.
Female

Male

Hose

God Bless
Swagman